915 Generation K202 Fingerprint Control Board,Low Power Consumption 12V Pow

Fingerprint module is activated by finger induction;Registering fingerprints is simple, just press the SET button to register fingerprints;The relay time can be adjusted by rotating the button
Registering fingerprints is simple, just press the SET button to register fingerprints;Can up to 120 fingerprints
K202 is designed for low power consumption, the power supply is DC10-24V, the relay time can be adjusted by rotating the button, the relay time: 0.5-13 seconds.Registering fingerprints is simple, just press the SET button to register fingerprints, and then long press the SET button to the default .
Control board description:1.SET button:Short press the SET button, the blue indicator light flashes quickly, the system enters the registration state, put your finger in the fingerprint area, fingerprint registration is successful when to music. When the system is in the registration state, you can register fingerprints continuously; if you do not need to fingerprints, wait a few seconds.
2. Return to default:Press the SET button until you hear a long "Di" beep and music, indicating that the initialization operation successful;3. Set the relay time:Turn K2 to set the closing time of the relay to 0.5 to 13 seconds. The relay is a contact output, a switching signal, and no voltage output;4. Use:Press the finger, the relay closes after the fingerprint passes, and the closing time is determined by K2.
Technical Parameters:
P1: Power supply: DC10-24V
Output: Relay (Max current: 10A)
Standby current: 15uA
Fingerprint capacity: 120
Size: 64.4 * 25.4mm
P2: MX 1.0mm pitch 6-pin fingerprint module (can be connected to R502, R502-A, R503)
P3: MX 1.25mm pitch 6-pin fingerprint module (can be connected to R300, R301T, R303, R303T, R305, R306, R307, R501)
Colour:Blue + Black
Material:PCB
Package Contents:
1 * Fingerprint control board
Note:
1. In the standby state, all the indicators are off, and in the working state, the indicators are on;
2. Any fingerprint can be used in the state, this function will be invalid after the fingerprint is registered.
K202 can be used with R300, R301T, R303, R303T, R305, R306, R307, R501, R502, R502-A, R502-AW, R503 fingerprint modules
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.