This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
₦ 5,845
₦ 10,82246%
1 units left
+ shipping from ₦ 1,273 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 1,273
Arriving at pickup station between 18 June & 24 June when you order within next 8hrs 5mins
Door Delivery
Delivery Fees ₦ 1,643
Ready for delivery between 18 June & 24 June when you order within next 8hrs 5mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
spring rain
60%Seller Score
19 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Good
Product details
Detailed Information About The Product:
This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
This board electrically isolates a controller from the high-power system by use of an opto-isolator IC.
This IC has four LEDs and four photodiodes built-in. This allows the low-voltage side to control a high voltage side.
We often use this board to allow a microcontroller control servos or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V), and may cause electromagnetic interferance with our system as the motors turn on and off.
Color: Red
Material: metal
PCB Size:25mmx26mm
This board will isolate the systems, creating a type of electrical noise barrier between devices.
This breakout board uses the TLP281 optoisolator and discrete transistors to correct the logic.
Comes with four channels. Great for use in noisy circuits where signal lines require electrical isolation.
A normal LED opto-isolator will invert the logic of a signal.
We threw some transistors on this compact board to correct the inversion.
What you put into the IN pins, will be replicated on the the OUT pins, but at the higher voltage (HV).
Package Contents:
1 x HW-399 4-channel Optocoupler Isolation Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
7560. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
This board electrically isolates a controller from the high-power system by use of an opto-isolator IC.
This IC has four LEDs and four photodiodes built-in. This allows the low-voltage side to control a high voltage side.
We often use this board to allow a microcontroller control servos or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V), and may cause electromagnetic interferance with our system as the motors turn on and off.
Color: Red
Material: metal
PCB Size:25mmx26mm
This board will isolate the systems, creating a type of electrical noise barrier between devices.
This breakout board uses the TLP281 optoisolator and discrete transistors to correct the logic.
Comes with four channels. Great for use in noisy circuits where signal lines require electrical isolation.
A normal LED opto-isolator will invert the logic of a signal.
We threw some transistors on this compact board to correct the inversion.
What you put into the IN pins, will be replicated on the the OUT pins, but at the higher voltage (HV).
Package Contents:
1 x HW-399 4-channel Optocoupler Isolation Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
7560. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system.
- This board electrically isolates a controller from the high-power system by use of an opto-isolator IC.
- This IC has four LEDs and four photodiodes built-in. This allows the low-voltage side to control a high voltage side.
- We often use this board to allow a microcontroller control servos or other motors that use a higher voltage than the TTL logic on the (3.3V or 5V), and may cause electromagnetic interferance with our system as the motors turn on and off.
- The details are as described above
What’s in the box
1 x HW-399 4-channel Optocoupler Isolation Module
Specifications
- SKU: 91368TG4FYAK5NAFAMZ
- Model: expanding board
- Production Country: China
- Size (L x W x H cm): 2.7x2.6x1.3
- Weight (kg): 0.0030000000000000001
- Color: Red
- Main Material: metal
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation HW-399 4-channel Optocoupler Isolation Module for Arduino
₦ 5,845
₦ 10,82246%
Questions about this product?