915 Generation For Liquid Level Sensor Module Liquid Level Detection Water

The liquid level sensor uses the principle of infrared optics to transmit the detected liquid level and liquid level signals through optical transmission and convert into electrical signals for output. The liquid level is judged by the voltage signal collected by the sensor. The sensor is in design, small in size, waterproof, and has a cylindrical shape that is convenient for drilling and installation;
The installation methods are diversified, which can be installed on the top, bottom, sideways, and obliquely. The sensor head is , easy to clean, and the accuracy is that of the float type liquid level switch. The controllable accuracy is within ±0.5MM.
The existing commonly used float type liquid level switch has an accuracy of ±3.0MM; light principle, no friction and other mechanical moving parts, the service life is greatly increased Working voltage; Dc5V
Working current: less than 10MA
Output mode 1: analog output 0-4.5V
Output mode 2: high/low level signal output
Response time: less than 500Ms
Insulation resistance: 100MΩ
Working temperature: -30~80 Celsius
Working humidity: 0-100%RH
Waterproof features: fully sealed waterproof design
Installation : M15*12 round hole
Lead Length: 0.5m
Size: 30MM x 20MM x 12MM
Colour:black
Material:pvc Package Contents:
1 * sensor
1 * probe Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.