915 Generation 24V 2 Way Learning Remote Control Switch for Car , Motors, D

1. This receiver is powered by 24V, and the default is two relay signal output (that is, without voltage output). The output terminals have a normally open terminal, a normally closed terminal, and a common terminal (both without voltage). This switch can generally be applied to the following two occasions.
2.With 24V voltage output, this kind of equipment only needs to draw a wire from the input terminal to the common terminal and then share the negative wire of the input to directly control the 24V device.
3. Directly connect the normally open end and common end of the output end to other voltage circuits to control ! (The recommended control voltage range is: 3V-250V, current range: 0.1A-10A resistive load)
4. The receiver has the following 3 working modes can be set, two-way jog, two-way -locking, and two-way . You can change the working mode according to your needs, to change the working mode when you change the working mode. In case of power failure
5. This distance is the theoretical distance without interference. The actual application is reduced due to the interference of the use environment. estimate according to the marked 10%-30%. The more you penetrate the wall, the closer the distance. Product name: 24V two-way remote control switch
Working voltage: DC24V
Working frequency: 433MHZ
Working mode: jog /-locking T4/lock
Code matching Intelligent learning type
Working environment: -40~+80 degrees
Receiving sensitivity: 2-105dBm
Output current: inductive 3.5A: resistive less than or to 6A
Dimensions: outer shell: 75x55x30mm; inner panel: 69x49x18mm
colour: green
Material: ABS Package Contents:
1 x Remote Control Switch Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.