This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeLarge Appliances & Home ImprovementMeasuring & Layout ToolsLaser Levels & Accessories2 Axis Controller CNC Laser-Engraver GRBL Control Board
₦ 37,358
₦ 67,25144%
2 units left
+ shipping from ₦ 7,348 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 7,348
Arriving at pickup station between 20 June & 26 June when you order within next 9hrs 34mins
Door Delivery
Delivery Fees ₦ 7,628
Ready for delivery between 20 June & 26 June when you order within next 9hrs 34mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
granel
34%Seller Score
44 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Very Poor
Product details
Detailed Information About The Product:
GRBL Control Board:
Connection: USB (USB-CH340)
Software: GRBL controller, UniversalGcodeSender
Master chip: 328P ( nano)
driver: A4988
Material: pcb
Color: as shown
Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )
Support : 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any 42, 57)
Laser-engraving: Support
GRBL Software:
https://u.pcloud.link/publink/show?code=XZwK72kZwr5g8aL1pkVtPk9LyPfMu7EUyRpV
Offline Controller:
1: Manual control: Manually adjust the position of the three axes of as the starting point of engraving, manually open or the spindle.
2: Document engraving: After the offline board is saved in the file, it can be connected to the GRBL control board for engraving, no need to connect to the computer.
3: Storage file: The offline version is connected to the computer and recognized as a USB storage device, which can directly access the engraving file.
Offline Controller Operate:
Press X+ and X- , the X axis will move left and right.
Press Y+ and Y- , the Y axis will move Front and Back.
Press SPIN: Spindle on (Laser-on), Spindle off (Laser-off)'
Press Exit/Step: return and change .
Package Contents:
1 x 2 Axis Controller
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
GRBL Control Board:
Connection: USB (USB-CH340)
Software: GRBL controller, UniversalGcodeSender
Master chip: 328P ( nano)
driver: A4988
Material: pcb
Color: as shown
Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )
Support : 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any 42, 57)
Laser-engraving: Support
GRBL Software:
https://u.pcloud.link/publink/show?code=XZwK72kZwr5g8aL1pkVtPk9LyPfMu7EUyRpV
Offline Controller:
1: Manual control: Manually adjust the position of the three axes of as the starting point of engraving, manually open or the spindle.
2: Document engraving: After the offline board is saved in the file, it can be connected to the GRBL control board for engraving, no need to connect to the computer.
3: Storage file: The offline version is connected to the computer and recognized as a USB storage device, which can directly access the engraving file.
Offline Controller Operate:
Press X+ and X- , the X axis will move left and right.
Press Y+ and Y- , the Y axis will move Front and Back.
Press SPIN: Spindle on (Laser-on), Spindle off (Laser-off)'
Press Exit/Step: return and change .
Package Contents:
1 x 2 Axis Controller
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- 2 Axis Controller
- cnc Controller
- cnc Control Panel
- Controller Card
- cnc
- The details are as described above
What’s in the box
1 x 2 Axis Controller
Specifications
- SKU: 91368IP43O60VNAFAMZ
- Model: Controller
- Production Country: China
- Size (L x W x H cm): 20x15x5
- Weight (kg): 0.15
- Color: multicolor
- Main Material: pcb
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation 2 Axis Controller CNC Laser-Engraver GRBL Control Board
₦ 37,358
₦ 67,25144%
Questions about this product?