Remote Control Led Digital Wall Clock Creative LED Mirror Hollow Wall Clock With Alarm/temperature Ring Light 7 Color Change HLS

12 -inch Digital RGB LED Mirror 3 Luminosity mode Hanging Clock From walls with alarm temperature Snooze Function
Features:
1. LED display of time.
2. Optional system 12 /24 hours.
Three. awake and snooty.
Four. Dispaly temperature function of $8451o $84577;.
Five. Range of temperature: 0.8451; ~ 50.8451;.
Six. night setting model (18:00 -06:00).
Seven. Mirror LED.
Eight. the time and temperature of switching.
Nine. three brightness settings.
Ten. with four functional keys (SET, UP, DOWN, RGB).
11. Time memory function (1XCR2032 battery per time memory function).
Specify:
Product format: circa 305 * 305 * 30mm / 12 * 12 * 1.18 # & 39; # & 39;
Corns and articles of exposure: 350 *345 *45mm /13.77 *13.58 *1.77 &35;39;'35;39;
Peso netto: 350g
Lord weight: 690g
Light LED digital display: White, Blue, Green, Red.
RGB color lighting: 7 colors: Red, Orange, Green, Blue, Blue Sky, Viola, White.
Guidance mode: Host: 1XCR2032 batteries + transmitters: 1XCR2032 batteries (apart) USB lines (including)
Powered by batteries, powered by USB lines, HAS CONDUCTED the light and will make BI sounds.
Drive with the USB line, display A LED is often brilliant.
Function key:
One. Press the SET button for switch: time of illumination temperature wakes up night mode ON /OFF.
B. Press the SU button for swtich 3 light of the brightness adjustment tools.
C. In mode now, press VERY BASE to turn on /off the alarm function.
D. Press the finger button to select any RGB lamp (red, orange, green, blu e, blu e sky, purple and white, switch off the 7 -light color, turn off the RGB lamp). The RGB lamp can only be used under the USB line.
Time regulation:
One. In time mode, press the SET button to access the time setting mode. The setting sequence: 12HR /24HR -hour -minute
B. During the setting process, the article setting will be flick.
C. Press UP once and in front; hold down for two seconds, move forward to an 8 -step /second speed.
D. Press DOWN once and back; hold down for two seconds, return to an 8 -step /second speed.
E. if the choice of 12HR format, will have PM display in the afternoon, but not c 35; 39; it is AM to show the morning time.
F. Press the SET button or without any operation within ten seconds to confirm the setting and return to the normal display.
Alarm setting:
One. Under mode now, press SET three times to enter alarm setting mode. Press the SET button, the AL icon and time will be flick, then enter the alarm time setting mode, the setting sequence: now -minute -time snooze (from 5 -60 minutes).
B. During the setting process, the article setting will be flick
C. Press UP once and in front; hold down for two seconds, move forward to an 8 -step /second speed.
D. Press DOWN once and back; hold down for two seconds, return to an 8 -step /second speed.
E. During the setting process, the AL icon is flicked.
F. Press the SET button or without any operation within ten seconds to confirm the setting and return to the normal display.
G. When alarming, press any key to stop the alarm.
when allarmante.
One. Buzzer for two minutes (BIBIBIBIBI)
B. press SET stop alarm button and active snooze function, the AL icon will flick until it is reached for the next alarm time.
C. Press buttons ON and OFF to stop the alarm. If AL icon stops flashing and disables the alarm function.
D. When it is time for alarm, the RGB light flashes along with the alarm.
Night mode function:
One. Night Mode means that the LED display will automatically dim brightness during the night.
B. During the interface time, press the SET button four times to enter Interface Night Mode. At L &35;39;TOTAL OR VERY BASE to activate or disable the night mode function
C. The default night mode is 18:00 -6:00
D. When Night Mode function in ON mode, press the SET button to access the night setting mode. The setting sequence: start now - start minute - stop now - stop minute
Alarm and snooze function:
One. The default sleep time is five minutes.
B. in alarm mode, press the SET key in the alarm, press SET three times to enter the sleep time settings. 05 flashing, set sleepy tempo from L &35;39;ALTO OR VERSO BASSO from five minutes to 60 minutes.
C. Press UP button to add 1 to a time, along Press UP key, increase by eight steps.
D. ON THE BASE OF THE BUTTON TO REDUCE 1, LONG ON THE BASE OF THE BUTTON LOOK, REDUCTION OF 8 -STEPS.
E. when the alarm clock is pressed, press SET to stop the alarm, turn on sleepy mode, and AL flare until the next one wakes the ends.
E. When the battery is powered, press any button to turn on the LED light for five seconds.
Brightness adjustment:
3 file brightness adjustment; default file brightness; press the SU button to change the lamp brightness.
Temperature display:
One. under temperature mode, press the SET temperature display button, touch UP button to move to the Celsius or Fahrenheit display step,
B. In temperature mode, the length is set until BI sound. Switch display LED: temperature (5 seconds)- time (10 seconds).
C. Long press the SET key to hear BI sound again and again for interface time.
NOTA:
Please allow 1 -3mm to differ due to manual measurement.

Because of the different exposure and light, the image cannot show the real color of the voice. Thank you for your understanding.

Packages:

1x12 Pollici Rotonda RGB Digital Alarm clock
1 x USB cable
1 x User Manual