Anself 10A 12V 24V LCD Solar Charge Controller Panel

This solar charge controller adopts the advanced digital techniques and operates fully automatically. The PWM battery mode can greatly increase the lifetime of your battery and has various unique functions and quite easy to use features.



Features:

LCD screen display all parameters.

With output switch, intelligent control, easy to operate.

Fully automatic operation.

Microcontroller digital accuracy.

A key to open and close the load.

PWM mode(SOC).

With separated temperature detected circuit, high precision temperature compensation function.

DC 12V and USB 5V for DC lamp and phone.



Protection:

Overload protection;

Short-circuit protection;

Lighting protection;

Under-voltage protection;

Over- protection;

Reverse polarity protection.



Specifications:

Color: Black

Material: Plastic

Voltage of Battery: 12V / 24V Automatic

Rated Charge/Discharge Current: 10A / 20A (Optional)

USB Output Voltage: 5V

Total USB Output Current: 3A

DC Output Voltage: 12V

Total DC Output Current: 2A

Overload/Short Circuit Protection: 1.5 Times by Rated Current

Short Circuit Recovery Time: 10s

Open Circuit Voltage of Solar Panel: 40V

No Load Loss: 0.05W

Over Voltage Protection: 15V; x2/24V

Float Charge Voltage: 14V; x2/24V

Discharge Recovery Voltage: 12V; x2/24V

Over Discharge Voltage: 10.5V; x2/24V

Control Mode: Software Intelligent Control

Working Temperature: -35~55°C

Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H)

Item Weight: 222g / 7.83oz

Package Size: 14.5 * 12 * 3.8cm / 5.7 * 4.72 * 1.5in (L * W * H)

Package Weight: 270g / 9.54oz



Note:

1. Order of Connection: connect storage battery firstly, then connect the solar panel; Order of Disconnection: disconnect the solar panel firstly, then the storage battery; otherwise it will cause damage to the controller.

2. The inverter can't be connected to the controller directly.

3. The controller will generate heat during operation, please notice that put the controller on flat surface with good ventilation.



Configuration Selection:

For 12V System, battery voltage is 12V, recommended input voltage of solar panel: 16-22V, when actual input voltage>50V, controller will be damaged;

For 24V System, battery voltage is 24V, recommended input voltage of solar panel: 32-44V, when actual input voltage>50V, controller will be damaged.



Package List:

1 * Solar Charge Controller

2 * DC Cable

1 * User Manual(English)