This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileTools & EquipmentDiagnostic, Testing & Measuring ToolsAdblue OBD2 Emulator for Ford Trucks AdBlue DEF and NOx
₦ 33,066
₦ 64,47949%
2 units left
+ shipping from ₦ 6,037 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 6,037
Arriving at pickup station between 21 June & 27 June when you order within next 2hrs 51mins
Door Delivery
Delivery Fees ₦ 6,407
Ready for delivery between 21 June & 27 June when you order within next 2hrs 51mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
tiny spots
66%Seller Score
30 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Excellent
Product details
Detailed Information About The Product:
Top 5 Reasons to Get AdblueOBD2 Emulator for Ford Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
AdblueOBD2 Emulator for FORD Trucks Description:AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Installation and Calibration for Ford Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (For FORD)
Terminal - 15
Terminal - 30
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Material:plastic
colour:As shown
Package Contents:
1 * adBlue OBD2 Emulator Box Interface
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Top 5 Reasons to Get AdblueOBD2 Emulator for Ford Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.
AdblueOBD2 Emulator for FORD Trucks Description:AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.
Installation and Calibration for Ford Trucks:
1. Pull the Key out from the ignition.
2. Remove the following Fuses (For FORD)
Terminal - 15
Terminal - 30
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.
Material:plastic
colour:As shown
Package Contents:
1 * adBlue OBD2 Emulator Box Interface
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- Durable and good quality
- Emulator Box Interface
- adBlueOBD2
- AdblueOBD2 Emulator
- AdblueOBD2 Emulator for FORD
- Emulator for FORD
- The details are as described above
What’s in the box
1 * adBlue OBD2 Emulator Box Interface
Specifications
- SKU: 91368VP3XQQF5NAFAMZ
- Model: Simulator box interface
- Production Country: China
- Size (L x W x H cm): 17x9x3
- Weight (kg): 0.052999999999999999
- Color: multicolor
- Main Material: plastic
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
915 Generation Adblue OBD2 Emulator for Ford Trucks AdBlue DEF and NOx
₦ 33,066
₦ 64,47949%
Questions about this product?