TV backlight not only provides beautiful ambient lighting but also enhances your viewing
experience so much that you’ll wonder what you did without it. Diminish the eye
strain you and your family experience on a nightly basis with a solution that
will make your entire living room beautiful.
You Get: 1 meters led strips, 1pc 24key remote controller (battery included),
1pc LED controller USB powered.
Relieves Eye Strain: TV
Backlight helps reduce the eye strain caused by long exposures to TV screens
and monitors in dark rooms and creates a comfortable bias lighting when
watching TV or playing games.
colors and 4 dynamic modes: LED TV backlight, dimmable. You can use the remote
control change the color, the brightness as well as different lighting modes.
Control distance is 8-10m.
Easy Installation: We use upgraded super
sticky 3M adhesive for this led light strip to provide secure and strong
installation without worrying about falling off. Just plug-and-play. Input: 5W
(5V, 1A). Please check USB output prior to use.
and Wide Application: 5V 5050 RGB LED backlight strip features low power
consumption and extremely low heat. It is touchable and safe to children.
Perfectly used for boutique lighting, stairs lighting, makeup mirror, wine
cabinet decoration, Christmas, Halloween, festival lighting decoration, clubs,
and other indoor decoration.
bring out your tv from the wall. Use a dry clean towel and clean the back from
the LED light package. Connect the USB cable to the small RGB controller you that
has four holes. Plug the USB end to your TV, Charger, Laptop or Power
bank, bring out the remote controller and remove the small nylon at the bottom
of the remote. Press the ON button and it should be ON. If it is not ON, DON’T
PANIC, unplug the LED strip light and turn and reconnect the end of the strip
light and ON it again. NOW IS ON!
Now switch it OFF and unplug everything and note the end of the
strip light that powered ON. Gently peal the back of the LED strip light, run
it round the back of the tv as displayed in the product picture above and
ensure that the end of the strip light that powered it is pointing downwards.
Connect everything back and mount back your tv on the wall and plug the LED
strip light back to the USB source. ON it and press the ON button on the remote
and you are good to GO. Don’t forget to come back and give us a 5 star positive