13MM MULTI 36V CORDLESS IMPACT DRILL

A cordless drill is an electric drill which uses rechargeable batteries. Drills are primarily used for drilling circular holes in material, or for inserting screws and other threaded fasteners into material.
Drills are also available in the impact driver configuration, high-torque tools primarily used for driving screws and tightening nuts. Impact drivers can be especially useful when driving larger fasteners or driving into harder, more dense materials.
Always use a spoil board under your work piece when using a handheld drill.Twist Bits - General Purpose: The tip of the bit cuts the material, while the flutes (spirals) remove the spent material from the hole and keep the bit straight. Most of the bits in the Idea Shop can be used across wood, metal, and acrylic -- be sure to adjust RPMs accordingly. When drilling into metal, be sure to use a lubricant.Spade bits: For making through holes in wood and other soft materials.Coutersink bits: An attachment used in conjunction with a twist drill bit, to create holes for screws or other fasteners to sit flush or inset into the material.Enhanced Application Versatility:Able to drill a large hole in siding / ALC / plywood with a hole saw or self-feed bit, which results in greatly increased versatility.Increasing the voltage of the Lithium-ion battery from 18V to 36V results in a slower temperature rise of the motor. Even when working continuously, the 36V maxmech tools are less likely to stop due to overheating than their 18V counterparts

• The tip of the bit cuts the material, while the flutes (spirals) remove the spent material from the hole and keep the bit straight. 
• Most of the bits in the Idea Shop can be used across wood, metal, and acrylic -- be sure to adjust RPMs accordingly. When drilling into metal, be sure to use a lubricant.
• Spade bits: For making through holes in wood and other soft materials.
• Coutersink bits: An attachment used in conjunction with a twist drill bit, to create holes for screws or other fasteners to sit flush or inset into the material.
• When the tool bit is suddenly overloaded during operation, the motor stops before the drill twists so as to minimize the danger of twisting the