Home Foam Bionic Incubator Automatic Temperature Control Incubator Tool Dual Power Supply Precise Temperature Control

Dreamodule Home Foam Bionic Incubator Automatic Temperature Control Incubator Tool Dual Power Supply Precise Temperature Control

Product selling points:

1. 100% and high-quality products.

2. Made of high-quality materials, durable and practical.

3. The temperature difference of the machine can be calibrated according to the measured temperature, so that the temperature is more accurate and the shell rate is higher.

4. Double power supply, not afraid of power failure.

5. Bionic incubation, inred by the structure and function of the organism, the bionic water bed designed according to the incubation conditions of the mother can easily hatch every e.

6. Accurate temperature control, self-contained photo es, not afraid of power outages, low energy consumption

Parameter:

Product voltage: AC110V-220V/DC12V

Power: 20W

Size: 36*24*19cm

Plug: American plug

Scope of application: all kinds of poultry es

Instructions:

Step 1: First add proper amount of water to the hatching water bag, ready to use.

Step 2: Ar receiving the incubator, lay the bottom heating pad flat. Place a water bag filled with water on the heating pad. The opening of the water bag is fixed in the foam box to the incubator with a clip to prevent water from splashing out.

The third step: Put the temperature r into the water bag and fix it with tape (it must be attached to the surface of the water bag and contact with the water bag). When you are ready, put the es.

Step 4: Start the test machine. Ar the temperature stabilizes, evenly put the sterilized es into the water bag in the incubator.

Step 5: In the incubator, ar the hatched es are laid, cover the quilt on the e with a breathable and warm quilt. It will not be too loose or too tight. The hatching proce does not need to cover the lid of the incubator. If the temperature is low, the quilt should be tightly covered ; If the temperature is high, do not cover it too tightly.

Step 6: Fill the watering can with water, put it into the machine, and keep the water temperature in the kettle consistent with the temperature of the es. Spray water three days before hatching, 2-3 times a day.

Notice:

Be sure to test whether the water bag leaks, otherwise it will cause the risk of short circuit.

You must ensure that the material being covered is breathable and that there is enough oxygen in the incubator.

Turn the es in the incubator upside down every day (2-3 times/day). Don't turn the es to remove heat.

Package list:

Incubator *1

Mini sprayer*1

Alligator clip line*1

Transparent plastic bag*1

Quilt*1

American plug adapter*1

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.